home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19941221-19950208 / 000306_news@columbia.edu_Sat Jan 28 03:50:59 1995.msg < prev    next >
Internet Message Format  |  2020-01-01  |  2KB

  1. Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA28893
  2.   (5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Sat, 28 Jan 1995 12:55:42 -0500
  3. Received: by apakabar.cc.columbia.edu id AA20083
  4.   (5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Sat, 28 Jan 1995 12:55:40 -0500
  5. Path: news.columbia.edu!sol.ctr.columbia.edu!newsxfer.itd.umich.edu!gatech!swrinde!cs.utexas.edu!news.cs.utah.edu!cc.usu.edu!jrd
  6. From: jrd@cc.usu.edu (Joe Doupnik)
  7. Newsgroups: comp.protocols.kermit.misc
  8. Subject: Re: Kermit and TCP/IP 32
  9. Message-Id: <1995Jan28.095059.39578@cc.usu.edu>
  10. Date: 28 Jan 95 09:50:59 MDT
  11. References: <3f8i67$5bd@hasle.oslonett.no> <3fe553$m4m@apakabar.cc.columbia.edu> <3garmn$ilq@hermes.fundp.ac.be>
  12. Organization: Utah State University
  13. Lines: 35
  14. Apparently-To: kermit.misc@watsun.cc.columbia.edu
  15.  
  16. In article <3garmn$ilq@hermes.fundp.ac.be>, jlg@fundp.ac.be (Jean-Luc GOFFIN) writes:
  17. >>>Has anyone tried to make Kermit run over Windows for Workgroups
  18. >>>and TCP/IP 32?
  19. >>Yes.
  20. >>> ..... However some users need Windows for Workgroups, and then a 
  21. >>>packet driver will not work.
  22. >>>
  23. >>MS-DOS Kermit 3.14 comes with a file that includes an extensive
  24. >>discussion of this problem.
  25. >>Anonymous ftp to kermit.columbia.edu, directory kermit/archives, binary
  26. >>mode, file msvibm.zip.  Unzip with "-d" switch.  Read top-level READ.ME
  27. >>to get started.  Read the Windows for Workgroups of NETWORKS/SETUP.DOC
  28. >>for the information you are asking for.
  29. >>
  30. >>- Frank
  31. > I use ethernet adapters 3com Etherlink Family.  I have make modifications 
  32. > in files system.ini and protocol.ini.  
  33. > I have a error PRO0008E "invalid decimal digit in protocol.ini file" 
  34. > "error loading protman.ini" when I execute "net start" in autoexec.bat 
  35. > file.
  36. > Does anybody have experience (samples files.ini) installing kermit 3.14 
  37. > under Windows for Workgroups 3.11 with 3c509 or 3c503 Etherlink card, 
  38. > netbeui, ipx/spx compatible with netbios, MS-TCP/IP 3.11a.  
  39. -------------
  40.     Syntax errors you will have to work out slowly at your end, but
  41. I can say that Kermit will not run over Microsoft's TCP/IP 32 bit stack
  42. nor can you use Kermit's internal TCP/IP stack with that second stack
  43. loaded.
  44.     Joe D.